3-stage, air-cooling piston reciprocating Oil splash lubrication Stainless steel inter-cooler and after cooler Specially treated alloy cylinder, piston and piston ring High-strength nylon cooling fan assembly Intake filter Anti-shock floor mat Manual condensate drain knob Safety valves protection for every stage High temperature resistance plastic powder coating steel frame and base Activated carbon, monocular sieve for air purification in the filter Filters are made by seamless aluminum alloy and bears 550bar pressure 1 Filling hose and filling valve Consumables and manuals are provided with every compressor 1 year warrant
SCBA breathing apparatus The RHZK series Positive Pressure Air Breathing Apparatus is a kind of automatic open-type air air breathing device. It is mainly applicable in firefighting, chemical industry, ships and vessel, petroleum, smelting and mine industries. It can help the fireman or the ambulance men to safely extinguish the fire, to safely deal with an emergency, or to safely carry out the rescue work in adverse circumstances where there are full of dense smoke, poisonous gas, steam ,or lack of oxy The air breathing apparatus in this series is equipped with a complete face mask that is transparent and has good air tightness and gives you a wide field of vision. The air supply device is equipped with a new type air supply valve that is small , light, and has stable performance. The device also adopts the high-strength backboard and the quality high pressure air tank that has a high coefficient of safety. The pressure relief valve unit is equipped with a residual air volume Warner that can send out noise and other acoustic signals to call the operator attention to leave the job site in time.
The RSX-F heat insulation suit for fire fighting is made with a flame-resisting fabric and an aluminum plated film compound material and no asbestos. It consists of jacket, pants, gloves, hood and foot cover. It posses light weight, high strength and flame-resisting heat. It can effectively protect the fire-fighter and the operator who is working at high temperature environment from flame and high temperature and meets the regulation of the standard for the performance and test method of heat insulation suit for fire-fighting. The raise of inner temperature of the suit is not higher than 25 Degree Celsius after it is shined 30 seconds by a 10kw/m heat radiator.
Marine Signal Light Marine navigation lamp,ship lamp LED light source Plastic shell and PC lampshade Ship:50m or above Marine Signal Light Engineering plastic shell and PC lampshade Used for ship with length of 50m or above Overall seal structure, and water-proof in extreme environment Working Environment:-30°C ~ 50°C More energy-saving and longer lifetime. Easy to replace bulbs through twisting off top cover.
1.XLPE insulation. 2.Fire-resistant. 3.Awarded CCS.ABS.BV.GL.DNV.LR.KR.NK.RINA. 4.Punctual shpment. Marine Cable: XLPE insulation Marine Cable IEC 60288 IEC60092-351 IEC60092-376 IEC60092-359 IEC60332-1 IEC60332-3Cat.A IEC 60331 IEC60754 IEC60134 Construction: 1. Conductor: tinned copper 2. Mica tape 3. Insulation: XLPE 4. Tape 5. Individual screen: tinned copper wire braided 6. Tape 7. Inner sheath: PO (SHF1, SHF2) 8. Screen/Armored: tinned copper wire braid (Galvanized steel wire braided) 9. Outer sheath: PO (SHF1, SHF2) Flammability Features: NA: Fire-resisting cable NC/NSC: Fire-resisting cable halogen-free, low-smoke, low-toxicity Specifications: Cores: 1, 2, 3, 4, 5, 7, 10, 12, 14, 16,19, 24, 27, 30, 33, 37. Nominal Cross-section Areas: 1 mm2, 1.5mm2, 2.5mm2 Application: The cable is intended for power, lighting and control system of shipboard and off-shore building, and it is also available to metallurgical industry chemical works, power planted and mines etc. Certificates: CCS,LR,ABS,DNV,BV,GL,NK,RINA; 90 The radius of bend for the installation of cables
EN396:1993/A1:1998 design and manufacture, and in accordance with international standards MSC.81 (70) related requirements. Small size, light weight, comfortable, easy to use, suitable for all kinds of water life-saving cruise ship operators, leisure life-saving can also be used as personal protective equipment. Main technical parameters：1）Weight：≤1kg； ；2) After water elevation: facial and horizontal angle ≥ 40 °; the body and the vertical angle ≥ 3 ° c 3) After water freeboards: mouth with horizontal distance ≥ 120mm c 4）Air charge time：≤5s；5）Float duration：≥24h； 6）Buoyancy loss after 24h：≤5%；7）CO2 weight：22g；8）Ambient temperature for use：-30℃～+65℃；9）Validity：3 years
SOLAS Life Jacket Used for international & inland sea-going ships & offshore installation. Buoyancy: Provide the minimum 147N Standard: the latest SOLAS conventional Approval by: CCS & 96/98/EC SOLAS Life Jacket Description: Mainly application: For Sea-going ships & offshore installations. Outside Fabric: High Quality Polyester Oxford cloth, high-visible Orange color with stranger color fastness. It will not fade exposed under the sun. Buoyancy Material: High Quality EPE foam rubber Reflective Tape: High visible SOLAS reflective tape 5cm x 12cm, 5cm x 14cm Belt: Black webbing with plastic buckle strong enough under SOLAS requirement, Length: 2M. Equipped with 2000mm length rescue line. Accessories: Water proof Lifejacket light, Whistles.
Crimping range Cu 10-150mm2 Crimping force 60KN Crimping type hexagon crimping Stroke 15mm Length:approx. approx.370mm Weight:approx. approx.2.2kg Oil capacity 60cc Package plastic box Weight of box approx.1.2kg Accessories: Crimping dies 10,16,25,35,50,70,95,120,150m2
Brand name: Bangjie Model No.: BJXJ026 Technical data: Model No. Rated Load Applicable diameter weight BJXJ026-4 4T ≤2200mm 55kg BJXJ026-6 6T ≤2500mm 65kg BJXJ026-8 8T ≤2700mm 80kg
Brand name: Bangjie Model No.: BJXJ016 Technical data: Model No. Rated Load Applicable diameter Applicable width Shaft stem diameter Weight BJXJ016-3 3T φ1400mm-φ2100mm ≤1400mm φ60mm 95kg BJXJ016-5 5T φ1600mm-φ2500 ≤1600mm φ76mm 120kg BJXJ016-10 10T φ2700mm-φ3300mm ≤1800mm φ100mm 170kg